Spid Grip Manual DoubleProducts > CLAMPING SYSTEMS > Teda clamping Systems - Official Partner > Speed Grip TouchW-TEDA

Speed Grip Touch

The SPEED TOUCH clamp allows you to reuse the existing intermediate on the bending machine, replacing only the front bracket, thus obtaining, with a minimum investment, a quick change system.
FRONTAL introduction / extraction of the standard European style ty tool and automatic return at the stop. Ability to mount the tool upside down.

Article No. With intermediate Price
CE-350041 INT100
CE-350042 INT120HD
CE-350043 INT150HD
CE-350044 INT120-40 HD
CE-350045 INT150-40HD
  • Description
  • Features
  • Attachments

Manual clamping unit for upper tool withrgonomic lever

UPPER TOOLS

Manual clamping unit for upper tool withrgonomic lever

FLEXIBILITY

It allows you to reuse the existing intermediate on the bending machine, replacing only the front bracket, thus obtaining, with a minimum investment, a quick change system.

FRONTAL LOADING

FRONTAL introduction / extraction of the standard European type tool and automatic return at the stop.

TECNICAL FEATURES

Unit height = 100mm.
Bending axis = 7mm.
Also available for 20mm bending axis.

DUAL ORIENTATION

Possibility of fitting tools on the rear side of the clamping units by bracket mod. 11008 (manual clamping) not included in the supply

Set-up time

 
OPERATION TRADITIONAL MODEL MANUAL WITH SCREWS MODEL TEDA SPEED GRIP MANUAL (13131-M)
Screws loosening 30 screws = 5″
total = 150″
15 modules by lever = 2″
total = 30″
Tool extraction Lateral = 25″
total = 100″
Frontale = 8″
total = 32″
Tool loading Lateral = 25″
total = 100″
Lateral = 6″
total = 24″
Pre-screwing 30 screws 4″
total = 120″
Light pressing to house tools 10″
total = 10″
Screws tightening 30 screws 3″
total = 90″
Clamping 15 modules by ergonomic screw 4″
total = 30″
TOTAL TIME 570″ = 9′,30″ 116″ = 1′,56″