CLAMPING SYSTEMS > CLAMPING SYSTEMS
Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m
Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m.
Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m
Manual upper fast clamping system, front clamp with lever for R5 (American) and R1 tools, length 150 mm. Max. Load 1000 kN/m.
Manual upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m
Manual upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m
Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m
Hydraulic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m
Pneumatic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m
Pneumatic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m
Retractable clamp in Fe37 for R1 dies with base 60 and 90 mm, length 170 mm.
Upper fast clamping system, hydraulic, in 42CrMo4 for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust
Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1550 to 4100 mm. max load 1800 kN/m head thrust and shoulder thrust
Upper fast clamping system, pneumatic, in 42CrMo4 for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust.
Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and shoulder thrust.
Fast lower clamping system in C45 hardened for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m.
Fast lower clamping system in C45 hardened, pneumatic, for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m
Hydraulic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.
Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.
Upper fast clamping system, Hydraulic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust
Upper fast clamping system, Hydraulic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 1500 kN/m shoulder thrust
Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust.
Upper fast clamping system, pneumatic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 1500 kN/m shoulder thrust.
Manual crowning table in C45 hardened and ground, for R1 dies. max.Load 2500 kN/m.
Motorized crowning table in C45 hardened and ground, for R1 dies. max.Load 2500 kN/m.
Manual crowning table in C45 hardened and ground. Hydraulic clamping for R1 dies. max.Load 2500 kN/m.
Manual crowning table in C45 hardened and ground. Pneumatic clamping for R1 dies. max.Load 2500 kN/m.
Motorized crowning table in C45 hardened and ground. Hydraulic clamping for R1 dies. max.Load 2500 kN/m.
Manual crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2500 kN/m.
Motorized crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2500 kN/m.
Manual crowning table in C45 hardened and ground. Hydraulic or pneumaticC for R2-R3-R4-R5 dies. max.Load 2500 kN/m.
Motorized crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 2000 kN/m.
Motorized hemming andcrowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R1 dies. max.Load 1500 kN/m.
Motorized hemming and crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 1500 kN/m.
Motorized hemming and crowning table in C45 hardened and ground. Manual clamping for R1 dies. max.Load 2000 kN/m.
Motorized hemming and crowning table in C45 hardened and ground. Manual clamping for R2-R3-R4-R5 dies. Max.Load 2000 kN/m.
Crowning table with manual crowning with indipendent wedges in C45 hardened and ground. Pneumatic or hydraulic clamping for R2-R3-R4-R5 dies. Max.Load 2500 kN/m.
Crowning table with manual crowning with independent wedges in C45 hardened and ground. Manual clamping for R2-R3-R4-R5 dies. Max.Load 2500 kN/m.
Automatic pneumatic clamping system for upper tools, with flexible connections
Quick pneumatic upper system in hardened C45 for New Standard tools, length from 1100 to 6100 mm. Maximum load 1800 kN / m on the head and shoulder.