ROL2 MANUAL
Fast lower clamping system, manual, for R1 dies, length 150 mm
ST50-S
| Article No. | Length | Weight | Price | |
|---|---|---|---|---|
| ST50-S | 175 mm | 0.7 |
|
- Description
- Features
Retractable clamp in Fe37 for R1 dies with base 60 and 90 mm, length 170 mm.
ST50-S is a simple but innovative solution to ease die change onto the press brake table.
ST50-S is considered a retractable clamp, as it can be pushed downwards when screws are released and reaches the same height of the press brake table. With ST50-S you don't have to slide dies sideways and push them until they reach their working position. You can place a die directly onto the press brake table in its working position with 3 advantages: operator's safety, less exertion, no table or die base damages, which guarantees better precision.
LOWER SYSTEM
ST50-S is compatible with all press brakes with Amada-Promecam tang. No tooling modification is required.
FRONT CLAMP
ST50-S is mounted on the front side of a press brake
TOOL CHANGE
Dies can be easily changed, as they can be slided frontally without having to lift them
ALIGNMENT
ST50-S can line up and clamp dies perfectly thanks to 2 front screws.
SAFETY
Dies can be safely changed thanks to this retractable die, as operator doesn't have to lift them over clamps. This means operator's safety and better care for tools and press brake table.
SUPPLY
The system is available in manual version.
It's a complete, manual, fast and convenient clamping system.
INSTALLATION
ST50-S is designed for a press brake with 100mm hole pitch. Put the two M10 allen screws of the table into the die slots and slide the clamp following the slot shape without removing the screws.