ROL3 HYD
Hydraulic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.
ROL3 PN
| Article No. | Price | |
|---|---|---|
| ROL3 PN |
|
- Description
- Features
Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.
ROL3 clamping systems represent the widest range for any type of press brake.
They are complete systems with clamps and beam and they can be pneumatic or hydraulic. Dimensions and length are taylor made according to the press brake upper beam. ROL3 is suitable for heavy duty jobs and for high tonnage, like 5000kN/m up to 10000 kN/m.
The material used for main frame and all components are FEM calculated to guarantee safety.
This solution is quick, handy and convenient.
UPPER SYSTEM
ROL3 clamping system can be produced for LVD, Bystronic
Beyeler RFA-RF-R-S, Colly, Colgar, Ajial-Axial, EHT and Ursviken press brakes.
TOOL CHANGE
Punches type R3 RFA, RF and R can be inserted vertically, whereas punches type R3 S, R4 and R5 can be slided in horizontally.
ALIGNMENT
Most R3 clamping systems can lift and seat punches automatically.
SUPPLY
The system is available in manual, pneumatic and hydraulic versions.
INSTALLATION
ROL3 systems can be mounted to an upper beam with holes and screws. During the design phase, Rolleri technicians prepare a product drawing.
In order to mount only clamps directly to an upper beam, the original hole pitch is used.
Instructions to connect the system to press brake CNC are given in the user manual.
POWER UNIT: PDU MOLT
- Controls air pressure at entrance & at end of line of circuit
- Multiplies air from compressor to ensure best clamp closure
- Gives electric signal to cnc in case of lowering pressure, setting press brake in alarm stop
- Every intermediate is connected to each other by pneumatich hoses and they need a pressure from 12 to 16 bar (depends on different models) in order to ensure the best tightening force
- TOP VERSION available, with a resistant protective case
REQUEST MORE INFORMATION
ROL3 MAN
Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.