Rolgrip Manual
Manual clamping for upper tools by means of a comfortable ergonomic lever.
Frontal introduction and extraction of the European-type standard tool and automatic return at the stop. Ability to mount the tool inverted, from the front of the press using the manual bracket 11008 complete with screws and springs (not included in the supply) tightening with screws.
| Article No. | With intermediate | Price | |
|---|---|---|---|
| Rolgrip Manual_int100 | INT100 |
|
|
| Rolgrip Manual_int120HD | INT120HD |
|
|
| Rolgrip Manual_int150HD | INT150HD |
|
|
| Rolgrip Manual_int120-40HD | INT120-40 HD |
|
|
| Rolgrip Manual_int150HD | INT150-40HD |
|
- Description
- Features
Manual clamping for upper tools by means of a comfortable ergonomic lever.
UPPER TOOLS
Manual clamping for upper tools by means of a comfortable ergonomic lever
FRONTAL LOADING
FRONTAL introduction / extraction of the standard European type tool and automatic return at the stop.
TECNICAL FEATURES
Bending axes = 7mm.
Also available H. 150 (13131-150-M) and H.120 20mm axis(13135-M).
POWER
Energy connection through patented “STAR SYSTEM”.
NO PRESENCE OF PIPES in the work area and free removal of modules immediately in any position.
DUAL ORIENTATION
Possibility of loading reversed tools using the bracket mod. 11008 (manual clampinng)
Set-up time
on 3mt press brake (15 modules)
| OPERATION | TRADITIONAL MODEL MANUAL WITH SCREWS | MODEL TEDA SPEED GRIP MANUAL (13131-M) |
|---|---|---|
| Screw loosening | 30 viti = 5″ total = 150″ |
15 moduli tramite leva = 2″ total = 30″ |
| Unloading tool | Laterale = 25″ total = 100″ |
Frontale = 8″ total = 32″ |
| Tool loading | Laterale = 25″ total = 100″ |
Laterale = 6″ total = 24″ |
| Pre-screwing 30 screws | 4″ total = 120″ |
– |
| Light pressing to house tools | 10″ total = 10″ |
– |
| Screwing 30 screws | 3″ total = 90″ |
– |
| Clamping 15 modules by ergonomic lever | – | 4″ total = 30″ |
| TOTAL TIME | 570″ = 9′,30″ | 116″ = 1′,56″ |