Products > CLAMPING SYSTEMS

CLAMPING SYSTEMS

Check the compatibility of the tools here

 

ROL200 MAN Extreme

Manual upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 KDS MAN Extreme

Manual upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 HYD Extreme

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 KDS HYD Extreme

Hydraulic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 PN Extreme

Pneumatic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 KDS PN Extreme

Pneumatic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 PN Power

Pneumatic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL200 HYD Power

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL4 MAN

Manual upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL4 HYD

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm length. Max. load 1000 kN/m

1000 kN/m max. on stock

ROL2 MAN

Fast lower clamping system, manual, for R1 dies, length 150 mm

on request

ROL2 HYD

Fast lower clamping system, Hydraulic, for R1 dies, length 150 mm

on request

ROL2 PN

Fast lower clamping system, pneumatic, for R1 dies, length 150 mm

on request

WROL HYD EXTREME

Upper fast clamping system, hydraulic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust

1800 kN/m max. on request

WROL HYD SUPREME

Upper fast clamping system, hydraulic, in 42CrMo4 for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust

1800 - 250 kN/m max. 42Cr: 900-1150 N/mm2 on request

WROL HYD POWER

Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1550 to 4100 mm. max load 1800 kN/m head thrust and shoulder thrust

1800 kN/m max. 42Cr: 900-1150 N/mm2 on request

WROL PN EXTREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust.

1800 - 250 kN/m max. on request

WROL PN SUPREME

Upper fast clamping system, pneumatic, in 42CrMo4 for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulder thrust.

1800-2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

WROL PN POWER

Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and shoulder thrust.

1800 kN/m max. 42Cr: 900-1150 N/mm2 on request

WROL/2 HYD

Fast lower clamping system in C45 hardened for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m.

2000 kN/m max. on request

WROL/2 PN

Fast lower clamping system in C45 hardened, pneumatic, for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m

2000 kN/m max. on request

ROL3 HYD

Hydraulic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.

5000 kN/m max. on request

ROL3 PN

Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.

5000 kN/m max. on request

ROL3 MAN

Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm.

5000 kN/m max. on request

ROL3/2 HYD

Hydraulic lower fast clamping system in C45 and 42CrMo4 for Colly, Axjal, Eht, Weinbrenner e Promecam base 69-90 dies(heavy duty). Length from 1100 to 6100 mm. Max. load 300 kN/m

C45: 560-710 N/mm2 on request

ROL3/2 PN

Pneumatic lower fast clamping system in C45 and 42CrMo4 for Colly, Axjal, Eht, Weinbrenner and Promecam base 60-90 dies(Heavy duty). Length from 1100 to 6100 mm. Max. load 300 kN/m.

300 kN/m max. C45: 560-710 N/mm2 on request

AROL HYD EXTREME

Upper fast clamping system, Hydraulic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

AROL HYD SUPREME

Upper fast clamping system, Hydraulic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

AROL HYD POWER

Upper fast clamping system, Hydraulic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 1500 kN/m shoulder thrust

1500 kN/m max. C45: 560-710 N/mm2 on request

AROL PN EXTREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

AROL PN SUPREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 2500 kN/m shoulder thrust.

2500 kN/m max. on request

AROL PN POWER

Upper fast clamping system, pneumatic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm. max load 1500 kN/m shoulder thrust.

1500 kN/m max. C45: 560-710 N/mm2 on request

FAST CLAMP1

Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m.

1000 kN/m max. on stock

DOUBLE FAST CLAMP1

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m.

1000 kN/m max. on stock

FAST CLAMP3

Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m

1000 kN/m max. on stock

DOUBLE FAST CLAMP3

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m

1000 kN/m max. on stock

EASY CLAMP

Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m

1000 kN/m max. on stock

DOUBLE EASY CLAMP

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m

1000 kN/m max. on stock

UNIVERSAL FAST CLAMP

Manual upper fast clamping system, front clamp with lever for R5 (American) and R1 tools, length 150 mm. Max. Load 1000 kN/m.

1000 kN/m max. on request

UNIVERSAL EASY CLAMP

Manual upper fast clamping system, front clamp for R5 (American) and R1 tools, length 150 mm. Max. Load 1000 kN/m.

1000 kN/m max. on stock

ST50-S

Retractable clamp in Fe37 for R1 dies with base 60 and 90 mm, length 170 mm.

Fe37: 370-470 N/mm2 on stock

ROL TM/R1/MN

Manual crowning table in C45 hardened and ground, for R1 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TA/R1/MN

Motorized crowning table in C45 hardened and ground, for R1 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TM/R1/HYD-PN

Manual crowning table in C45 hardened and ground. Hydraulic or pneumatic clamping for R1 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TA/R1/HYD-PN

Motorized crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R1 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TM/R2/MN

Manual crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TA/R2/MN

Motorized crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TM/R2/HYD-PN

Manual crowning table in C45 hardened and ground. Hydraulic or pneumaticC for R2-R3-R4-R5 dies. max.Load 2000 kN/m.

2000 kN/m max. C45: 560-710 N/mm2 on request

ROL TA/R2/HYD-PN

Motorized crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 2000 kN/m.

C45: 560-710 N/mm2 on request

ROL TA/R1/HYD-PN-SPE9

Motorized hemming andcrowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R1 dies. max.Load 1000 kN/m.

1000 kN/m max. C45: 560-710 N/mm2 on request

ROL TA/R2/HYD-PN-SPE9

Motorized hemming and crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 1000 kN/m.

1000 kN/m max. C45: 560-710 N/mm2 on request

Rolgrip Star

Automatic pneumatic clamping system for upper tools

on stock

Rolgrip Flex

Automatic pneumatic clamping system for upper tools, with flexible connections

on stock

Rolgrip Manual

Manual clamping for upper tools by means of a comfortable ergonomic lever.

on stock

Rol Touch

Manual clamping unit for upper tool withrgonomic lever

on stock

Request our catalogues

Bending Tools - general
Bending Tools - Hämmerle-Bystronic
Bending Tools - American
Clamping systems
Punching tools
Iron worker
Laser consumables

* = Required fields

Request more information

Press brake
Punching machine
Ironworker
Laser
Panel bending
Shear cutter

* = Required fields