RVXT-1Products > BENDING SOLUTIONS > Rolla-V > RVXT-2GREASE RVX1

RVXT-2

Article No. Length Weight Model Price
RVXT-2.050 50 mm 1.00
RVXT-2.440s 440 mm F 8.80
RVXT-2.100 100 mm 2.00
RVXT-2.200 200 mm 4.00
RVXT-2.500 500 mm 10.00
RVXT-2/SP Spring
RVXT-2/IN 250 250 Insert
RVXT-2/IN 100 100 Insert
RVXT-2/IN 90 90 Insert - set
RVXT-2/U U Clip
Rolla-V die XT Series in 42 Cr. max.load 500 kN/m. min. angle 60°
Rolla-V die XT Series in 42 Cr. max.load 500 kN/m. min. angle 60°
  • Description
  • Features
  • Attachments

Rolla-V die XT Series in 42 Cr. Max.load 500 kN/m. Minimum angle 60°.

440 mm F

The Rolla-V XT serie dies are ideal for:

  • Making tight counter-bends thanks to the thinner stem;
  • Bending sheet metal with deformations near the bending line;
  • Bending much narrower edges than conventional dies;
  • Excellent for bending crooked cut metal sheets without deforming any edges;
  • Bending profiles with holes or button holesnear the bending line without deformation;

MIN. EDGE - Mild Steel

Punch radius R0.5 mm R0.019 in R1.0 mm R0.039 in
Sheet Metal thickness 0.8 mm 0.031" 4.9 mm 0.19 in 4.7 mm 0.18 in
Sheet Metal thickness 1.0 mm 0.039" 5.5 mm 0.22 in 5.4 mm 0.21 in
Sheet Metal thickness 1.5 mm 0.059" 6.0 mm 0.24 in 6.1 mm 0.24 in
Sheet Metal thickness 2.0 mm 0.078" 5.8 mm 0.23 in 6.6 mm 0.26 in

NECESSARY FORCE - Mild Steel

Punch Radius R0.2 mm R0.007 in R1.0 mm R0.039 in R3.0 mm R0.11 in
Sheet Metal thickness 0.3 mm 0.01" 40 kN/m 50 kN/m 50 kN/m
Sheet Metal thickness 0.5 mm 0.019" 50 kN/m 50 kN/m 50 kN/m
Sheet Metal thickness 0.8 mm 0.031" 70 kN/m 80 kN/m 90 kN/m
Sheet Metal thickness 1.0 mm 0.039" 80 kN/m 100 kN/m 130 kN/m
Sheet Metal thickness 1.2 mm 0.04" 110 kN/m 140 kN/m 180 kN/m
Sheet Metal thickness 1.6 mm 0.06" 200 kN/m 220 kN/m 250 kN/m
Sheet Metal thickness 2.0 mm 0.078" 300 kN/m 330 kN/m    
Sheet Metal thickness 2.3 mm 0.09" 400 kN/m 420 kN/m    
Sheet Metal thickness 1.2 mm 2.0 mm
With "V" 10 mm 10 mm
Max. Load kN/m 500 500
Min. Angle 60° 60°
Necessary Strength - Mild steel* 120 320
Necessary Strength - Stainless steel** 170 450
Min. Edge - Mild steel 4.9 mm  6.0 mm
Min. Edge - Stainless steel 3.3 2.4

*Necessary Strenght - Mild steel max.450 N/mm2

**Necessary Strenght - Stainless steel max.700 N/mm2

ACCESSORIES

RVX1: GREASE

RVX1 grease is a lithium lubricant with particular properties. Thanks to its additives it bears the loads of compression. It protects the parts subjected to sliding. Very suitable for preserving the seat of the inserts or rotors and avoiding abrasion. The single pack contains 500 g of grease.

Add to cart

RVX-TAPE: PROTECTION

Fix the RVX-TAPE protections on the dies for those applications where the sheet metal must not show any signs. These are adhesive strips made with composite materials able to resist compression and to maintain a particularly compressible and anti-friction contact surface with the sheet.

Add to cart

RV-TO: ASSEMBLY TOOL

This tool is created to facilitate the release of the spring from its lower pin. Thanks to its shape, the tool allows you to start the operation in absolute safety and to replace worn parts very quickly.

Add to cart

RVP65-2

Rolla-V die RVP series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

RVP100-3

Rolla-V die RVP series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

RVXT-1

Rolla-V die XT series in 42 Cr. Max.load 500 kN/m. Minimum angle 60°.