RVM2.5_12.7
Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.
RVM90-4_13TOOLS > PRESS BRAKES > Rolla-V > RVM90-4_60RVHD2
Article No. | Model | Length | Weight | Price | |
---|---|---|---|---|---|
RVM90-4-60.250 | 4 | 250 mm | 24.6 |
|
|
RVM90-4-60.500 | 4 | 500 mm | 61.3 |
|
|
RVM90-4/SP.60 | Spring |
|
|||
RVM90-4/IN.60 | Insert |
|
|||
RVM90-4/DO.60 | Dowel |
|
|||
RVM90-4/U.60 | U Clip |
|
Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.
Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.
Rolla-V die with 12.7mm milled groove. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.
Rolla-V die with milled groove 13 RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.
Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.
Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.
Rolla-V die with milled groove 13 RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.
Adjustable "V" Rolla-v die in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.