Products > BENDING SOLUTIONS > Rolla-V

Rolla-V

Rolla-V models in comparison

 

Mod.XT1

Mod.XT2

Mod.1

Mod.2

Mod.2.5

Mod.3

Mod.3.5

Mod.4

Maximum thickness*

1,2 mm

2,3 mm

1,5 mm

3,2 mm

6,3 mm

6,3 mm

8 mm

16 mm

With V

5,7 mm

10 mm

8 mm

15 mm

28 mm

38 mm

60 mm

85 mm

Maximum resistance

500 kN/m

500 kN/m

1000 kN/m

1500 kN/m

2500 kN/m

2500 kN/m

2500 kN/m

3000 kN/m

*maximum recommended value. For further information please contact

 

RVXT-1

Rolla-V die XT series in 42 Cr. Max.load 500 kN/m. Minimum angle 60°.

500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVXT-2

Rolla-V die XT Series in 42 Cr. Max.load 500 kN/m. Minimum angle 60°.

500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVP60-1

Rolla-V die RVP series in 42 Cr. Max. load 1000 kN/m. Minimum Angle 35°.

1000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVS80-1

Rolla-V die RVS series in 42 Cr. Max.load 1000 kN/m. Minimum Angle 35°.

1000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT55-1

Rolla-V die RVT series in 42 Cr. Max.load 1000 kN/m. Minimum angle 35°.

1000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT90-1

Rolla-V die RVT serie in 42 Cr. Max.load 1000 kN/m. Minimum angle 35°.

1000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT100-1

Rolla-V die RVT series in 42 Cr. Max.load 1000 kN/m. Minimum angle 35°.

1000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVP65-2

Rolla-V die RVP series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

1500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVS80-2

Rolla-V die RVS series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

1500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT60-2

Rolla-V die RVT series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

1500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT90-2

Rolla-V die RVT series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

1500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVT100-2

Rolla-V die RVT series in 42 Cr. Max.load 1500 kN/m. Minimum angle 47°.

1500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM2.5_12.7

Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

2000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM2.5_13

Rolla-V die with milled groove 13 x 20 mm. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

2000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM2.5_60

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

2000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM3.5_12.7

Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

RVM3.5_13

Rolla-V die with milled groove 13 mm. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

RVM3.5_60

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on request

RVT100-3

Rolla-V die RVT series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVP100-3

Rolla-V die RVP series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM70-3_13

Rolla-V die with milled groove 13 RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM70-3_12.7

Rolla-V die with 12.7mm milled groove. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM70-3_60

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM70-3_90

Rolla-V die with 90 mm base. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM90-4_13

Rolla-V die with milled groove 13 x 20 mm. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

3000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM90-4_12.7

Rolla-V die with milled groove 12.7 x 19 mm. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

3000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVM90-4_60

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

3000 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVPV3

Adjustable "V" Rolla-V die in 42 Cr. Max.load 2500 kN/m. Minimum "V" 39 mm. Maximum "V" 94 mm.

2500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVHD2

Adjustable "V" Rolla-v die in 42 Cr. Max.load 2000 kN/m. Minimum "V" 13.2 mm. Maximum "V" 28.2 mm.

2000 kN/m max. 42cr-Toolox33 on request

RVHD2.5

Adjustable "V" Rolla-v die in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

2500 kN/m max. 42cr-Toolox33 on request

RVHD3

Adjustable "V" Rolla-v die in 42 Cr. Max.load 3500 kN/m. Minimum "V" 39 mm. Maximum "V" 118 mm.

3500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RVHD4

Adjustable "V" Rolla-v die in 42 Cr. Max.load 3500 kN/m. Minimum "V" 39 mm. Maximum "V" 118 mm.

3500 kN/m max. 42Cr: 900-1150 N/mm2 on stock

RV-TO

Tool for Rolla-V springs maintenance and replacing

on stock

ROLLA-V DIES

Rolla-V press brake dies are the ideal solution for bending very small and mark-free edges. These dies with rollers provide a series of advantages for…