ROL 4Media > W ROLQUICK LOCK

W ROL

The WROL line clamps represent an evolution of the R2 New Standard tool fixing system. They are crosspieces that are presented in a single piece characterized by a new aesthetic and mechanical concept. Each WROL is managed with an ad hoc heat treatment to give the right hardness to the surfaces in contact with the tools. Depending on the forces required, you can choose between the Power, Supreme or Extreme versions. There are several possible lengths, from 1100 mm (3.608 ") to 6100 mm (20.131") for any type of press brake.
It is also possible to transform a press brake with R1 attachment into R2 New Standard with the possibility of recovering "light" on the press brake thanks to only 80 mm (3.15 ") of working height.
In this configuration, the AWP (fixed) and AWPC (with wedges) solution is available to adjust the camber.

To optimize the aesthetics and functionality of the WROL, the system has reduced dimensions to a minimum and a high quality of design, thanks to the insertion of LED bars to indicate the correct positioning of the tool or more simply to have a signal of on / off system.

WROL HYD EXTREME

Upper fast clamping system, hydraulic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m sho…

WROL HYD POWER

Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1550 to 4100 mm. max load 1800 kN/m head thrust and shoulder thrust

WROL HYD SUPREME

Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulde…

WROL PN EXTREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m sho…

WROL PN POWER

Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and shoulder thrust.

WROL PN SUPREME

Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm. max load 1800 kN/m head thrust and 2500 kN/m shoulde…

WROL/2 HYD

Fast lower clamping system in C45 hardened for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m.

WROL/2 PN

Fast lower clamping system in C45 hardened, pneumatic, for R2 and R3 dies, length from 1020 to 6120 mm. max load 2000 kN/m