Manual upper fast clamping system, front clamp with lever for R5 (American) and R1 tools, length 150 mm. Max. Load 1000 kN/m.
UNIVERSAL FAST CLAMP
UNIVERSAL FAST CLAMP represents the right synthesis between traditional screw systems and the most common lever systems.
With this solution we have a bracket built in a more resistant material with the application of a heat treatment that gives the surfaces greater hardness and an anti-oxidant property.
UNIVERSAL FAST CLAMP was created to block 2 types of attack: R1 and R5 American.
By means of a calibrated and machined plate with special outlets, it is sufficient to move the plate in the right direction to house R1 or R5 punches.
The clamping principle is based on the concept of the lever using a central pin.
The peculiarity of UNIVERSAL FAST CLAMP is that the pin is always adjustable.
This allows permanent control of the clamping force even on punches whose attachment may be slightly worn.
UNIVERSAL FAST CLAMP is mounted on all standard intermediates and thanks to a hardened reinforcement plate, the central pin does not scratch the intermediate body as happens with traditional systems.