FAST CLAMP1
Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m.
EASY CLAMPMedia > FAST CLAMP1FAST CLAMP3
FAST CLAMP1 represents the right synthesis between traditional screw systems and the most common lever systems. With this solution we have a bracket built in a more resistant material with the application of a heat treatment that gives the material greater hardness and an anti-oxidant property.
The clamping principle is based on the concept of the lever using a central pin.
The peculiarity of FAST CLAMP1 is that the pin is always adjustable. In this way we have permanent control of the clamping force even on the punches whose attack could be slightly worn. FAST CLAMP1 is mounted on all standard intermediates and thanks to a hardened reinforcement plate, the central pin does not scratch the intermediate body as happens with traditional systems. The standard lever is equipped with a removable extension for even easier clamping and the same extension can be used for the FAST CLAMP1 with the short "LC" lever to eliminate any lateral obstruction and facilitate the bending of boxed profiles. Thanks to the insertion of the ROL1 presser on the R1 punches, the insertion and release of the tool is vertical with self-alignment.
Manual Upper fast clamping system with front clamp for R1 tools, length 150 mm. Max. Load 1000 kN/m.