MR90Products > BENDING SOLUTIONS > Special Dies > Dies with Rollers > MR130

MR130

Article No. Length V [mm] B [mm] C [mm] Weight Price
MR130.20.78 835 mm 20 45 6 22,0
MR130.30.78 835 mm 24 49 6 25,0
MR130.30.78 835 mm 30 60 8 28,0
MR.130.40.78 835 mm 40 78 8 34,0
MR130.50.78 835 mm 50 84 10 40,0
MR130.60.78 835 mm 60 94 10 45,0
MR130.75.78 835 mm 75 118 16 50,0
MR130.80.78 835 mm 80 123 16 55,0
MR130.90.78 835 mm 90 133 16 60,0
MR130.100.78 835 mm 100 143 16 65,0
MR130.120.78 835 mm 120 163 16 70,0
Die with rollers H=130 mm. V min. available 20 mm and V max. available 120 mm.
Die with rollers H=130 mm. V min. available 20 mm and V max. available 120 mm.
  • Description
  • Features
  • Attachments

Die with rollers H=130 mm. V min. available 20 mm and V max. available 120 mm.

The dies with rollers represent an effective solution for making bends with a significant reduction of the marks on the sheet metal.
This is possible due to the presence of ground and hardened rollers that rotate accompanying the sheet metal inside the "V".
The rotation of the roller produces an attenuation of the frictions thus reducing also the necessary tonnages in the order of 10-15% less.
The seat of the "V" is also worked with measures that prevent accidental roll-out of the roll.
Each die is made of 42CrMo4 tool steel and can have different tangs for fixing on the lower bench. For a better management of the springback of the sheet metal, the "V" are at 78°.

Tangs available:

 

A10-A11-A13