RVM70-3Products > BENDING SOLUTIONS > Rolla-V > RVM70-3_12.7RVM70-3_13

RVM70-3_12.7

Article No. Model Length Weight Price
RVM70-3.455s.12,7 offset tang 455 mm F 20.1
RVM70-3.500.12,7 offest tang 500 mm 22.1
RVM70-3/SP.12,7 Spring
RVM70-3/IN.12,7 Insert
RVM70-3/DO.12,7 Dowel
RVM70-3/U.12,7 U clip
Rolla-V die with milled groove 13 RVM series in 42 Cr. max.load 2500 kN/m. min. angle 47°
Rolla-V die with milled groove 13 RVM series in 42 Cr. max.load 2500 kN/m. min. angle 47°
  • Description
  • Features
  • Attachments

Rolla-V die with 12.7mm milled groove. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 47°.

455 mm F

The Rolla V dies are distinguished from the traditional ones by the presence of 2 oscillating rotors which support the sheet metal before the bending process. Their peculiarity consists in the rotation of the rotors that accompanies the sheet metal during the bending with a drastic reduction of the friction resistance and of the length of the minimum edge. This type of tool applies the concept of tangential bending whereby the behavior of the sheet is different: this is more noticeable if holes and slots are present near the bending areas. Thanks to this concept, these areas do not undergo the classic deformations more commonly known as "slurries".

  • Sheet metal supported during bending process
  • Minimum movement of the sheet metal on the inserts reduces bending marks
  • Internal bending radius is the same of the punch tip radius
Sheet metal thickness 2,0 mm/0,078 in 4,0 mm/0,157 in 6,0 mm/0,236 in
with "V" 38 mm/1,496 in 38 mm/1,496 in 38 mm/1,496 in
Max. Load kN/m 2500 2500 2500
Min. Angle 68° 47° 50°
Necessary Strength - Mild steel* 70 340 900
Necessary Strength - Stainless steel** 110 500 1300
Min. External edge  22.5 mm/0,885 in 22.5 mm/0,885 in 22.5 mm/0,885 in
Max. external radius 13.9 mm/0,547 in 11.9 mm/0,468 in 9.9 mm/0,389 in

*Necessary Strenght - Mild steel max.450 N/mm2

**Necessary Strenght - Stainless steel max.700 N/mm2

ACCESSORIES

RVX1: GREASE

RVX1 grease is a lithium lubricant with particular properties. Thanks to its additives it bears the loads of compression. It protects the parts subjected to sliding. Very suitable for preserving the seat of the inserts or rotors and avoiding abrasion. The single pack contains 500 g of grease.

Add to cart

RVX-TAPE: PROTECTION

Fix the RVX-TAPE protections on the dies for those applications where the sheet metal must not show any signs. These are adhesive strips made with composite materials able to resist compression and to maintain a particularly compressible and anti-friction contact surface with the sheet.

Add to cart

RV-TO: ASSEMBLY TOOL

This tool is created to facilitate the release of the spring from its lower pin. Thanks to its shape, the tool allows you to start the operation in absolute safety and to replace worn parts very quickly.

Add to cart

RVHD2.5

Adjustable "V" Rolla-v die in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

RVHD2.5_12.7

Adjustable "V" Rolla-v die with 12.7mm tang in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

RVHD2.5_13

Adjustable "V" Rolla-v die with 13mm tang in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

RVHD2.5_60

Adjustable "V" Rolla-v die with 60mm base in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

RVM90-4_12.7

Rolla-V die with milled groove 12.7 x 19 mm. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

RVM2.5

Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

RVM2.5_12.7

Rolla-V die with milled groove 12,7 x 19 mm. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

RVM2.5_13

Rolla-V die with milled groove 13 x 20 mm. RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

RVM90-4

Rolla-V die with milled groove 13 x 20 mm. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

RVM90-4_60

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.

RVM90-4_13

Rolla-V die with milled groove 13 x 20 mm. RVM series in 42 Cr. Max.load 3000 kN/m. Minimum angle 73°.